Wavlink Extender Setup Tips to Boost WiFi Signals

Are you facing slow internet issues because of the slow internet? Many internet users are facing the same issues. We are here to help you with a number of tips to improve your WiFi speed. 

Specialized Features Of Extenders

Wavlink Extender is known for its wide range of Signals from renowned manufacturers. As we are all habitual of constant internet connections with unbreakable speed. But sometimes the internet performs really very badly, and it is not one’s fault as technology is getting advanced so is the internet taking its wheels on the sky. Although we have the Wavlink Extender setup login direct portal window also to log in and tweak the credentials accordingly. But we are not sure if you are able to log in to the portal so check the given steps first.

Disconnect Extra Devices

There may be chances of signal division. If the Wavlink Extender signal is connected to more than one device. This can be a major reason to slow down the WiFi signals. We recommend disabling all the extra devices connected to boost the WiFi signals.

Some Key Points To Emit Dead Zones

  • A regular extension wire could result in creating dead zones. Due to small wires, the desired connectivity area remains so far from the router.
  • You need to use an extension cord in some cases if you want to stretch the range of the modem to the upper floors. In addition, do not place the extender on an elevated bookshelf.
  • Adjusting the antenna’s position also helps in rebroadcasting the signal in a specific direction.
  • Optimizing the range of the extender, which comes with detachable antennas, is much easier than switching them with higher amplified antennas to optimize the range.
  • Therefore, you might use the signal reflector to divert the signal from one end to the other end of the house or office. You can use aluminum foil or some cans to create a WiFi deflector. 

Note: All these tips are provided to set up the Wavlink AC1200 setup and Extender Setup as well. 

Remove Barriers

Many electronic objects around the device are potentially strong to absorb or reflect the WiFi signals. Objects such as reflecting items like mirrors and metals reflect Wi-Fi signals, and thick walls, and closets block the signals by absorbing them. Cordless phones spread a lot of radiofrequency. Electronic objects like microwave ovens, refrigerators, etc. might disturb the WiFi signals massively. So make sure, whenever you place an extender, keep them away from the products which are proven to be the barriers. So the Wavlink Extender does not face any Interface.

Update Your Router

If you are receiving bad signals then possibly your internet speed will be lacking. To steal your internet bandwidth hackers sometimes infect your router with malware and viruses.

Therefore, the malware could also travel through the signal networks and can easily infect your device. Keeping the router’s firmware updated ensures your security and faster internet access.

Move Your Router To A Better Location

If you have placed your router at the edge of your home’s space, it is possible that you may have issues with Wi-Fi signals at the other end. The best place for a router is a central location and elevated place, near where you use the internet mostly. However, it is not a big task but yes do not place the router to the basement that sets you back for connectivity issues. Like this, these issues will easily vanish.

Keep The Extender Proximate To The Router

Always keep the router near the extender and see whether there is any change or increment in the signal speed. As this step fixes this issue very quickly. If this simple setup isn’t helping much then you can log in to the portal of Wavlink AC1200 setup and arrange the settings yourself.

We hope this article was informative enough to solve the internet issues regarding slow internet, and we have given a lot of tips on configuring the device and the modem which will definitely help in slow extender speed or Wavlink extender setup for sure.