Troubleshoot The Orbi Device Unable To Login Issue

Though the Orbi device is famous among hundreds of users. But, the speed just gets behind because there may be some setup issues that need to be settled down. We are up with a lot of tips by doing which you will find is not rocket science.  

Orbi Device Special Features 

The Orbi router is known for its wide wireless coverage and good performance. This device, if installed in the right place and the right way, can spread the signals at corners as well. However, if you just doubt yourself while performing the process then we must say you have landed at the right place. 

Let’s Just Have A Look At the Issue To Be Treated 

  • The first main reason could be an improper login.
  • Just look if the ethernet wire is not broken.
  • If doing an IP configuration then the figures that you feed do match. 
  • Choose the right place for the installation of the devices. 

Let’s move further.

Perform The Orbi Login Through This Process

  • First, just make sure the Orbi router can connect the device through the wireless method or an ethernet wire.
  • Secondly, the router and the modem are in proper connection, and the supply of power is also proper. 
  • Then, following these steps plug the Orbi satellite as well in the power source.
  • When you plug in the Satellite make sure the LED light on the Satellite is blue. 
  • Launch a web browser on your device and get access through a  
  • device like a laptop/a computer.
  • Type orbilogin.com in the web address of your browser. 
  • Enter the username and password in the web address.
  • Select the Login button from the given boxes.
  • However, it will take you to the setup page of the Orbi. 

Follow the above steps as they are good to surf the Orbi Login page.

What If The Orbi Login Not Working?

Let’s just employ the Orbi troubleshooting tips to fix the setup issues in Orbi Login. 

  • Make sure all your devices are properly connected and are getting a good power supply.
  • Ensure that your device is getting the proper internet connectivity. 
  • Connecting the device by the medium of an internet wire could help better as told above.
  • An old version of the browser might set you back up with the connection, so update the device to the latest version. 
  • If this issue is persisting often then, swap on to the other browser. 
  • Incorrect credentials can also create a problem so make sure of the characters before feeding. 

Note: Do not forget to contact our experts as well, if you are not aware of your Orbi Login credentials.

Reset Might Help If Your Orbilogin Not Working!

If you are not getting any help through any of the sources then, resetting and configuring the device could help. The only thing that you will think is not right is that it will erase your previous settings on the device and make you run to default settings simultaneously. To reset your device:

  • Plug your router into the power source.
  • Just discover the Reset button which is on the back panel of it.
  • Get it done through the pin-like device.
  • Pop up the button tightly on the back with the pin you are holding.
  • That is it with the Orbi resets to the default settings.

The above mention can also help in the reset of the Orbi Satellite as well. Do not forget to configure the device again once you reset your device.

Orbi Login using Orbi App

Although if you think the above methodology is very hard then you can use the then, you can also use the Orbi login app on your cell phone.

  • This Orbi Login app is available for both iPhone and Android users. 
  • So download this app and install it on your cell phone. Or the Macbooks or the Windows as well. 
  • Make sure you are in connection with the WiFi networks of the Orbi device after installing the app. 
  • You will reach the login page of the Orbi app, and at the same time, you will be asked to fill in your Username and password. 
  • Just tap on the sign-in option and type the login credentials. 
  • You will finally reach the admin console of the router if you have inserted the right credentials. 

The Next Step Is To Change Wi-Fi Network SSID And Password

You can change the admin and password of the WiFi networks to SSID. This is an easy process; you just need to log in with the details of the router.

Change SSID

This is the versatile process through which you can easily change the Wi-Fi SSID from the Orbi Login Admin settings:

  1. The below-mentioned methods will help you. 
  2. First, reach the Login window then go to Basic > Wireless.
  3. Look for the Name (SSID) field under the Wireless Network section.
  4. Finally, type WiFi SSID in the given field of networks. 
  5. Tap on the apply button to save the changes made to the settings. The SSID will enable you to reconnect as after changing the settings all the pre-connected devices will automatically disconnect.

Change Password

Here is how you can change the Wi-Fi Password from the Orbi Admin Console:

  1. This is the method through which you can reach the Login Admin of the router.
  2. When you are logged in to the wireless device go to the basic wireless settings. 
  3. Look up the Network Key which is basically the password under the security option. 
  4. Typing the password of your WiFi in the empty field should at least consist of 8-10 characters. 
  5. By clicking on the apply button you can change the WiFi password of your device. Therefore, you can also connect to the networks.

Hopefully, troubleshooting the whole process is not as tough as we think. If we talk about the Orbi login not working issues they were equally helpful. Get in touch if the problem is still not getting resolved. Contact our experts via email or through a chat box.