Troubleshoot: EX3700 Netgear Extender Dropping Internet Issue

Is your Netgear WiFi extender causing the internet to drop? Is your downloads are taking forever and taking too long to access any web page? Then, something is not right with your WiFi extender. Well, there could be many reasons behind this dropping internet issue. However, you can fix this issue by simply going through the below information if you don’t have any technical knowledge.

Solutions: EX3700 Netgear Extender Dropping Internet Issue

Check the Placement of Netgear Extender

Poor placement of your Netgear extender can be a reason to cause your internet to drop. Therefore, be careful while selecting the place for your Netgear range extender. Avoid reflexive surfaces and the objects such as refrigerators, cordless phones, Bluetooth speakers, or other radio-emitting devices to prevent any kind of interference in your WiFi signals. Moreover, always place your extender within the range of your home router to avoid loss of connection.

Check the Physical Connection

Make sure that the physical connection you are using is connected well with each other, Any damage to the Ethernet cable or AC cable can cause mywifiext.net not working issue. Therefore, swap the cable if you found any damage.

Reboot your Netgear WiFi Extender

Rebooting your Netgear WiFi extender can fix your issue. For rebooting, just disconnect your Netgear extender from all of your WiFi-enabled devices and turn it off. Disconnect it from the power source and wait for some time. Then, plug in your WiFi extender into the power socket again and turn it on. Re-connect your WiFi-enabled device again to the WiFi extender and check if the issue has been resolved. Else, move to the next troubleshooting method.

Update Netgear Extender Firmware

It’s recommended to use the latest version of Netgear WiFi extender firmware to avoid issues. If you aren’t aware of the update process of your Netgear WiFi extender. Then, carefully go through the steps mentioned below to update your Firmware without any stress.

  • Turn on your WiFi extender and computer device.
  • On your computer system, access an updated version of the Internet browser.
  • Visit Netgear extender login page using default IP address i.e. 192.168.1.250.
  • Once you are on the Netgear extender login page, enter the default username and password.

Important Note: For Netgear extender default username and password, refer to the user manual.

  • Hit the Enter key.
  • Once logged in, you will view a Netgear extender setup wizard.
  • Head to the Advanced tab on the Netgear extender setup wizard.
  • Go to Administration and click on the Firmware update option.
  • Next, you need to click on the Check button to search for new updates.
  • If found, click on the yes button to begin the update process of your Netgear WiFi extender firmware.
  • Then, follow the instructions appearing on your screen to finish the Netgear extender firmware update.

Once updated, then connect your WiFi-enabled device to your extender to access your internet services and check if the issue has been resolved. If not, move to the next troubleshooting method.

Reset and Re-configure EX3700

If none of the above-mentioned methods works for you, then you can reset your Ex3700 Netgear extender to the default factory setting to resolve the internet dropping issue. Many users aren’t aware of the process to reset their Netgear WiFi extender to the default factory mode. If you are one of them, then just follow the below-mentioned steps.

  • You need to locate the reset button on your Netgear WiFi extender.
  • Once located, press and hold the reset button till the LEDs start flashing.
  • Then, your Netgear WiFi extender will restart automatically and will be restored to the default factory settings.

Once restored to the default factory mode, you need to re-configure your Netgear WiFi extender using the default web address i.e. mywifiext.net.

Important Note: Its recommended for MAC operating system users, to access the Netgear extender login page use mywifiext.local to avoid any issue.

Using these above-mentioned troubleshooting methods, you can easily resolve your Ex3700 Netgear extender dropping issue.