Netgear Router Flashing Blue?

Getting Netgear router flashing blue error? No worries! This isn’t a big issue to be worried about. Netgear router flashing blue light means that it is booting up. So, wait for a short while till the LED gets stable.

If Netgear router flashing blue light for a longer time than expected, then it means that there is something wrong and you need to think something to fix the issue as soon as possible.

Wondering how to fix Netgear router flashing blue light issue? Wonder no more! In this troubleshooting guide we will provide you one of the best fixes to resolve “Netgear router flashing blue light” issue in a jiffy. Let’s take the plunge!

Fix: Netgear Router Flashing Blue

Fix 1

Select Best Placement for Netgear Router

Bear in mind, if your Netgear router is placed under a table, inside cabinet, nearby thick walls, or corners, then also you may get “Netgear router flashing blue” light issue.

Thus, to fix the issue in a flash, make sure that your Netgear router is placed on an open and non-congested area.

Once you see stable green LED on your Netgear router, access the www.routerlogin.net setup page and configure it (if not configured) by following the on-screen configuration instructions.

Fix 2

Configure Your Router Properly

Incomplete configuration of your Netgear router may also lead you to experience the issue. Don’t worry! This issue will be fixed shortly. Just ensure to configure it in a proper way.

What? Not sure whether you have configured your Netgear router correctly or not? No worries! Reset your Netgear router first and then take the plunge to configure it.

Fix 3

Outdated Netgear Router Firmware

The outdated firmware version on your device will surely lead you to “Netgear router flashing blue” issue.

So, what you have to do – visit the official site of your router using routerlogin.net and update router’s firmware from the comfort of your home.

Getting routerlogin.net not working issue? No problem! Just ensure that you are using an up-to-date web browser and you have entered the correct web address without typos in the internet browser URL bar.

Fix 4

Power Cycle Netgear Router

As we have already mentioned above, if you are continuously getting flashing blue LED on your Netgear router then you have to think something quickly to get it fixed. Because continuously getting blue color LED on your Netgear router will degrade the performance of your Netgear router.

So, it will be better to power cycle your Netgear router.

Here are the guidelines to be followed in exact given order:

Step 1: First of all, unplug your Netgear router.

Step 2: Wait for a few minutes.

Step 3: Plug your Netgear router back in.

Step 4: The Netgear router’s power LED will start blinking green. Wait for it till it becomes stable.

As soon as you see stable green LED on your Netgear router, we suggest you to log in to it (router), and change the existing Netgear WiFi router login password.

You might be thinking that where these two points are related, right? How can changing the Netgear WiFi router login password helps in fixing the issue?

The answer is simple! “Netgear router flashing blue” light issue can persist due to heavy traffic on your Netgear router or unknown devices are connected to the router’s WiFi. So, it becomes crucial to make changes. As soon as you change the Netgear WiFi router login password, all the unwanted devices will get disconnected. And, once they get disconnected, you can allow only those devices to connect to your router’s SSID that are known to you. And, once known devices are connected to your router’s SSID, it will become load-free and will only give you cool green LED.

Thinking about how to log in to Netgear router? Think no more! You can easily log in to your Netgear router using routerlogin.net web address or 192.168.1.1 IP (in case you get routerlogin.net not working issue), and make changes to the router accordingly.

After following the fixes provided in this article, you will definitely get a permanent fix for “Netgear router flashing blue light” issue.