Boost Speed Of Wavlink WiFi- In 7 Ways

Do you know how you can boost the speed of wavlink WiFi? If your reply is ‘NO’ then don’t worry we are here with you to discuss a few tips by which you can easily boost the speed of WiFi.

Let’s Go,

Disabled Unused Devices

Those devices connect to the internet using your router bandwidth. Make sure that all of the devices which are not in use must be turned off so that they do not catch your WiFi signal. When you finish this process then try to connect with WiFi again to check if you get the best performance.

• You can also log in to your router on a computer to see all the connected devices and remove that ones that you don’t want on your WiFi network.
• If you don’t recognize devices connect to the router then someone else signed into your WiFi and use your internet. Disable all the devices and immediately create a stronger password.

Tip: If you don’t know how to login into your router then go to wifi.wavlink.com, type it in the URL bar of the web browser.

Locate Your Router In Half-way Location

Routers that are near the exterior walls would not have more range and coverage. Just try to locate your router in the main area of your home so that it is able to send a strong WiFi signal in all directions of your house. Join one end of the ethernet cable to a long port or modem to put the plug back in it.

Shift Material Away From the Router

Anything between your Wavlink WiFi router and device weak the strength of your WiFi signal. Those objects which cause the most interference with your WiFi network include metal, microwaves, cordless phones, concrete, etc. Even wood, water, brick, etc also absorbs the WiFi signal and decrease the range of your WiFi. When you locate your router then just avoid locating your router on a floor or near the exterior wall.

Switch Frequency Band

2.4GHz band easily passes through walls and increases the range of WiFi. Most of the routers have 2.4GHz and 5GHz frequency bands that you attach separately. Manually changes the 2.4GHz frequency band to get high speed and increase the range of WiFi. 5GHz bands offer you the strongest WiFi signal it also does not travel through the ceiling walls so it does not give you the best range.

Update the Software Of the Router

Update firmware of the router improves the overall performance of the router. Look online for your router model to see if there are any updates listed on the manufacturer’s website. If you see any update then you will need to login into your router on a new window of your browser and look at the option ‘Firmware Updates. Download that file on your router. Prior to trying out your WiFi again wait until to update the software successfully.

Locate Foils On The Side Of The Router

Foil paper reflects the signal of WiFi in the direction in which you want it to go. Place a piece of foil paper around something such as a soda bottle or water bottle to help you to give the shape to it. Now take out the piece of foil paper and place it vertically at the side of the router to prevent the WiFi signal from going in that direction. For just an example, set a foil paper between your device and router, if you don’t want your WiFi signal absorbed by the window or wall. Check here the process of ap.setup.

Purchase Wavlink WiFi Extender

Wavlink WiFi extender is a device that easily and quickly extends the range of the WiFi router. It helps you to remove all the dead spots. As normal connect your device and computer to a WiFi network. With the help of an extender, you can easily enjoy the speed of WiFi in outdoor areas. 

Tip: If you are unable or don’t know how to set up a wavlink extender then just simply go to the Wavlink extender setup portal. Follow the instructions very carefully and step by step which are shown on your screen or display.

Conclusion

We hope, with the help of this article you are able to increase the range of WiFi with the help of these following tips. If you are still facing any doubt then contact your internet service provider. Stick around for more updates.